waste PET bottles recycled granulation equipment/pelletizing device/pelletizer, PET cans and so on. The equipment with High-torque twin-screw extruding screw unit, this  is a new-technology large-speed, higher-torque and high-power twin screw extruder recognizing technological promotion primarily based on the present solution by drawing expertise from the innovative manufacturing technological innovation in China.

 

The advantages of this equipment
1. Hugely efficent: the device is automated and with significantly less energy consumption.
two. Special screw layout: We will style the screw up to consumer different material and the materials of screw and barrel can be 38CrMoAL or bimetallic.
three. This equipment can have out ideal viscosity of PET CZPT complex precystallization dryer technique. Only a little bit IV will be lowered. It can improve IV in the situation of introducing some suitable additive.
five. The machine wih long life.

other sort of these sorts of device

Design	TSSK20	TSSK30	TSSK35	TSSK50	TSSK65	TSSK72	TSSK92
Screw diameter(mm)	21.seven	30	35.6	50.five	62.4	71.2	ninety one
Rotary speed(rpm)	600	400	four hundred/600	five hundred/600	400/500	400/five hundred	400/five hundred
Major motor electrical power(kw)	4	11	eleven/15	37/forty five	fifty five/seventy five	90/one hundred ten	220/250
L/D	32-40	28-48	32-48	32-forty eight	32-48	32-48	32-40
Capacity(kg/h)	two-10	5-thirty	ten-80	twenty-one hundred fifty	one hundred-300	300-600	600-1000

Layout of the machine

More information device photoes
Crystallization dryer: dryer the PET flakes in progress
Vulume: 1000L.
Heater power: 36kW
Heat way: by electric
Blower electrical power : 4kW
Mixer power: two.2kW
Mixer shaft: SS304
Materials: Within stainless steel, exterior A3, With warm insulation layer.
With the open up doorway on the hopper, it will be simply operate.

One screw feeder  For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, solitary screw feeder, feeding the material similarly and stably.
Horizontal screw parameter:
Screw diameter:φ60
Electricity:one.5kw
Materials of hopper: SS304
There is sight glass on the hopper, employee can be see the material in the hopper

Twin screw extruder machine
Barrel number: 10
Duration of barrel #one-ten is 234mm
Total duration of barrels: ~2340mm
Barrel #one-9 produced of 38CrMoAl substance, Hardened to ≥61HRC
The barrel section are cooled with h2o, every barrel adopts solitary throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#one open for feeder, Barrel#4: open up barrel, for organic degassing, Barrel#six, Barrel#sixty eight: open barrel, for vacuum degassing. The others is shut.
The processing segment is provided with stainless metal go over as a safety against.
Diameter :sixty two.4 mm L/D: 36:1
Centre length: 52mm
Substance of screw: W6Mo5Cr4V2
Rotating pace (counter rotating): 400RPM
A pair of screw shafts, full with screw components, screw shafts  substance is 40CrNiMo, Hardened to ≥61HRC

The content appear out from the die(pull entice like noodles pelletizing way, PET need to use this pelletizing way. And the its want very good vacuum, like roots pump, then the pellets will be much far better)

Cooling for the screw( h2o managed by electrical valves)

Screw aspects of the device

Vacuum, we can use Roots vacuum or Bipolar pump.

Degassing on the extruder

H2o tank
Materials appear from the die and go into the h2o tank for cooling, There is rubber roller in the tank, substance strap can be send into gale dryer to blower the h2o on its surface.
Size of tank : 4m,
Substance of tank is SS304, Materials of bracket :Q235
It Can be moved up and down, CZPT and again up to the die and materials essential.
Electrical power of blower on gale dryer:2.2kW

Pelletizer
A. Portal shaped type pelletizer,horniness alloy rotary cutter
B. ability:300kg/hr
C. motor electrical power:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction speed :thirty-90m/min
G. No. of cutter gears: 32
H. Max amount of traces: much less than sixty
Ultimate pellets and Raw substance

If you require  more information of this type of equipment kindly speak to me, I can deliver you much more depth photoes and  vedios.

1. We provide beneath needed files with the equipment:

1. Machine structure
2. CZPTity diagram
3. Equipment certification
4. CZPT guide e-book/upkeep ebook

two. We offers one-year high quality promise. For the duration of this interval, if the machine’s malfunction is approved to be our duty, we will deliver the broken spare elements to you with DHL courier or other way in 7 workdays after acquiring the complainant. And send the specialists to the buyer’s manufacturing facility for preserving. All charges are in our account.

3. Soon after one 12 months promise, If you need to have we can provides payable spare parts and technician’s Browsing servicing, and any broken spares we can send out you shortly as feasible.

four. We believe in that our quotation satisfies with your requirements and we will gladly furnish you with additional info.

5. 24Hours service :  Cell-139157 0571 eight