Introduction
Δ Material: PE/PP film, PP Woven/sack Bag, Printed BOPP film
Δ Potential: sixty-800KG/HR
Δ Finial pellet measurement: Φ 3mm× 3mm
Work steps
1. Feeding: as regular design, plastic scraps such as film, filament, raffias conveyed into the compacting area via belt conveyor to take care of rolls’ scraps, roll hauling off gadget is an optional feeding approach. Motor drives of conveyor belt and hauling unit cooperate with ABB inverter. Feeding pace of conveyor belt or roll hauling off is totally automatic based on how total the compactor’s place is. Steel detector can be blended with belt conveyor, and can interlock with management system, to warn and stop the program, in circumstance that metallic is located in feeding section.
2. Crushing and compacting: the rotatory blades of compactor will cut up incoming scraps. Frictional heating which triggered by high velocity rotatory blades will warmth and let scraps shrinking just underneath their agglomerating stage. Optimum made guidebook framework compacts the substance and directs it into extruder screw. Crushes, dries and compacts the substance which allows a rapidly and secure feeding from the compactor straight into the extruder.
three. CZPTization and degassing: A specialised single screw extruder utilized to gently melt the pre-compacted material. The plastic scraps will be properly melted, plasticized in a 32 to 34D processing area. With double-zone vacuum degassing system, volatiles such as minimal molecular and dampness will be taken out effectiveness, specially suited to weighty printed film and material with some drinking water content.
four. Soften filtration: a regular solitary-plate/ piston double-station display changer or non-end double-plate/ piston four-station can be set up on head of extruder to current significant filtration functionality. The needs on the filter technology depend seriously on the quality of the input material as properly as the prepared use of granules.
five. Pelletizing: die-encounter h2o ring pelletizing method established as the normal granulating method in MLsystem. Self-altering pelletizing head for the best granulate good quality and lengthy uptime many thanks to regularly right blades force. RPM of rotatory blades is automated dependent on soften extruding strain. Superior dewatering vibration sieve combining with horizontal-kind centrifugal dewatering current high functionality dried pellets.
Closing pellets(PE film)
Major technical parameter
| Model | ML85 | ML100 | ML130 | ML160 | ML180 | |||
| Output | PP | 120KG | 250KG | 400KG | 600KG | 800KG | ||
| HDPE | 150KG | 300KG | 500KG | 700KG | 1000KG | |||
| LDPE | 180KG | 400KG | 600KG | 800KG | 1200KG | |||
| Device excess weight | 4000KG | 6000KG | 8000KG | 12000KG | 15000KG | |||
| Whole power | 140KW | 215KW | 325KW | 420KW | 590KW | |||
| Compactor/agglomerator |
Compactor diameter | φ800mm | φ1000mm | φ1200mm | φ1300mm | φ1500mm | ||
| Blade(rotary/secure) | six/5 | 6/12 | nine/12 | nine/13 | twelve/15 | |||
| Motor | 37KW | 55KW | 90KW | 110KW | 160KW | |||
| Extruder | Sort | The degassing zone is designed by qualities of various substance | ||||||
| Screw diameter | φ85mm | φ100mm | φ130mm | φ160mm | φ180mm | |||
| L/D | 33/1 | 33/1 | 33/1 | thirty/1 | 30/one | |||
| Screw rotary velocity(RPM) | -one hundred twenty | -a hundred and twenty | -120 | -a hundred and twenty | -a hundred and twenty | |||
| Barrel heating electrical power | 24KW | 35KW | 54KW | 75KW | 120KW | |||
| Barrel cooling strategy | BY AIR | BY AIR | BY AIR | BY AIR | BY AIR | |||
| Temperature handle zone | .3KWx4 | .3KWx5 | .5KWx5 | .5KWx5 | .5KWx6 | |||
| Motor electricity | 55KW | 90KW | 132KW | 185KW | 250KW | |||
| Display screen changer | Type | Two situation plate hydraulic display changer(CZPT stopping equipment and will not affect the final output) | ||||||
| Heating | 7KW | 10KW | 16KW | 20KW | 30KW | |||
| Temperature management zone | one | 1 | 1 | 1 | 1 | |||
| Oil pump | 1.5KW | two.2KW | 3KW | 3KW | 3KW | |||
| Die & cutting system |
Die mode | Round shape die plate | ||||||
| Heating electrical power of die | 5KW | 6KW | 10KW | 10KW | 10KW | |||
| Slicing strategy | Die face chopping method | |||||||
| Slicing motor electrical power | 1.5KW | one.5KW | 2.2KW | two.2KW | 2.2KW | |||
| Temperature control zone | 1 | 1 | one | one | one | |||
| Drinking water pump | 2.2KW | 3KW | 4KW | 4KW | 4KW | |||
| Energy of centrifugal dryer | two.2KW | 3KW | 4KW | five.5KW | seven.5KW | |||
In order to match your prerequisite and supply you a correct quotation, you should recommend:
• What material do you want to recycling? PE movie? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of granules you want?
• Other particular specifications about the PE plastic pelletizing machine you want.
Our provider:
Prior to-sale
• Introduce goods in detail
• CZPTmmend suitable solution
• Offer examination
In the course of manufacturing
• Supply format and engineering conditions
• Offer screw strategy and related paperwork
• Advise the undertaking processing status
• Insure the solution developed in accordance with specialized doc
Right after-sale
• Supply set up, commissioning and training
• Offer you spare parts
• Provide needed technological assistance and update information
Really feel free of charge to get in touch with with me if you want to find out far more info.
Contact persion:Ms. Laura
Mob.:86~thirteen 0571 88828 13858117778962366319
