Portable Quick Cooling Chiller
Characteristics
Structure
Panels and foundation frame are created from galvanized steel protected with polyester powder painting to make sure total resistance to atmospheric agents
Compressor
Airtight scroll sort compressor, equipped with the crankcase heater and thermal defense with thermal overload minimize-out and crankcase heater mounted on rubber vibration isolators
Axial fan
Exterior rotor type axial supporters, equipped with single period immediate drive motors, minimal sounds six poles, protection level IP54, provided with a protecting outlet grille
Evaporator
High performance and reduced force fall stainless steel (AISI 316) h2o exchangers, with anti-freeze heating element (option) and differential stress swap, manufacturing facility insulated with flexible near cell content
Condenser
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins,a hundred% entirely good quality analyzed sub cooling circuit to avoid freezing at the foundation (optional) safeguarded with steel grill
Desuperheater
Substantial performance stainless metal brazed plate heat exchanger, manufacturing facility insulated with adaptable close cell material(optional)
Refrigerant circuit
Copper tube link with cost valve, filter, sight glass, gasoline-liquid separator, thermostatic growth valve, low pressure swap with automated reset, substantial strain change with guide reset . The heat pump device is concluded also with four-way valve, liquid receiver and one particular way valve
H2o circuit
Created with air vent valve, drinking water drain connection, and woman-threaded hydraulic connectors
Water pump (8kW-30kW), differential stress switch
Enlargement tank (8kW-30kW)
CZPT panel
Is composed of:
Compressor contactor
Compressor defense breaker
Supporter motor protection breaker
Management circuit safety breaker
Stage sequence relay (only for 3-phase)
Programmable microprocessor controller
Optional
Additional electric powered heater embedded in the coils for defrosting in minimal temperature ambient. It should be factory installed
Stainless steel masking
Distant condenser
Tube in tube warmth exchanger
Water circuit electric heater
CZPT Information
| Model | Unit | twenty | twenty five | thirty | 35 | forty | 50 |
| Cooling * | |||||||
| Cooling capacity | kW | 21.five | 24.8 | 30 | 35.six | 41 | fifty.6 |
| Cooling input (CZPT water pump) | kW | eight.2 | nine.03 | nine.39 | 13.2 | fifteen.02 | 18.8 |
| EER | / | 2.62 | 2.seventy five | 3.19 | two.7 | two.73 | two.sixty nine |
| Heating ** | |||||||
| Heating capacity | kW | 26.3 | 29 | 34 | 41.8 | forty seven.2 | sixty |
| Heating input (CZPT water pump) | kW | eight.7 | nine.23 | nine.43 | 14.3 | fifteen.fifty seven | 20.forty five |
| COP | / | 3.02 | three.14 | three.61 | two.ninety two | three.03 | 2.ninety three |
| Hermetic compressor | |||||||
| Kind | / | ||||||
| Quantity/ circuit | / | 2/2 | 2/two | two/2 | two/two | 2/2 | 2/two |
| Evaporator | |||||||
| Variety | / | ||||||
| Water flow | m3/h | 3.seven | four.three | 5.2 | 6.1 | seven.1 | eight.7 |
| Water side pressure drop | kPa | 38 | 39 | forty two | 50 | fifty two | fifty two |
| Water connection size | mm | DN40 | DN40 | DN40 | DN40 | DN40 | DN40 |
| Circulating pump | |||||||
| Power input | kW | .75 | .75 | .92 | ——— | ——— | ———– |
| Axial fans | |||||||
| Quantity | Nr. | one | one | 1 | 2 | two | 2 |
| Airflow | m3/h | 9000 | 9000 | 12580 | 17000 | 17000 | 22000 |
| Overal dimension | |||||||
| Length | mm | 1600 | 1600 | 1600 | 2000 | 2000 | 2000 |
| Width | mm | 900 | 900 | 900 | 900 | 900 | 900 |
| Height | mm | 1080 | 1080 | 1080 | 1080 | 1080 | 1080 |
| Noise level *** | dB(A) | sixty six | sixty six | 68 | 70 | 70 | 70 |
| Net weight | kg | 270 | 290 | 310 | 360 | 380 | 465 |
* Ambient temperature 35ºC consumer aspect h2o in/out twelve/7ºC.
** Ambient temperature 7ºC consumer facet water in/out forty/45ºC.
*** Sound strain calculated at a length of one m and a top of one.5 m earlier mentioned the floor in an excellent discipline (supporter aspect).
Product Catalog
Task
Ordering Method
